A standard Pokemon card measures 2.5 x 3.5 inches, or 63.5 x 88.9 millimeters. That’s the exact size every official Pokemon TCG card has used since the game launched in 1996.
This guide breaks down every pokemon card dimension you’ll need — sleeves, top loaders, frames, jumbo cards, and even how to spot a fake using measurements alone.
Standard Pokemon Card Size Chart
Every number in this pokemon card size chart applies to standard cards from any set, any era, any language.
Width and Height Breakdown
The width of a Pokemon card is the shorter edge, running 2.5 inches across. The height is the longer edge, running 3.5 inches from top to bottom.
Hold a card upright and the height is what you’re looking at vertically. This distinction matters when you’re ordering custom sleeves or binder pages online.
Pokemon Card Thickness and Weight
Standard cards run about 0.30mm to 0.32mm thick, which trading card collectors call 35pt. Holographic and full-art cards sometimes hit 0.35mm because of the extra foil layer.
A typical card weighs 1.7 to 1.8 grams. That weight comes from a tri-layer cardstock build with a dark core sandwiched between two paper layers — a construction method PSA uses during authentication.
Pokemon Card Dimensions vs Other Trading Cards
Pokemon Card vs Magic: The Gathering
Magic: The Gathering cards measure 2.5 x 3.5 inches, identical to Pokemon. Sleeves, deck boxes, and binders are fully interchangeable between the two games.
Pokemon Card vs Yu-Gi-Oh! Cards
Yu-Gi-Oh! cards run smaller, at roughly 2.3 x 3.3 inches (59mm x 86mm). This is the single most common mistake new collectors make — grabbing Yu-Gi-Oh! sleeves for Pokemon cards, only to find they’re loose and don’t protect the corners properly.
More Post: Standard Window Dimensions: Complete Width, Height & Size Guide
Pokemon Card vs Standard Playing Cards
A regular poker-size playing card is also 2.5 x 3.5 inches. Same corner radius, same footprint — Pokemon TCG borrowed this exact format from traditional card games.
Pokemon Card vs Baseball/Sports Cards
Baseball and basketball cards in the US also use 2.5 x 3.5 inches. Sports card sleeves and top loaders work fine for Pokemon cards, which is why hobby shops sell them side by side.
Pokemon Card Size Comparison to Everyday Objects
Pokemon Card vs Credit Card
A credit card measures 3.37 x 2.125 inches. A Pokemon card is close but slightly larger in both directions — about 3/8 of an inch wider and a little shorter.
Pokemon Card vs US Dollar Bill
A dollar bill is 6.14 x 2.61 inches. Fold it in half the short way and you get roughly 3.07 x 2.61 inches — just shy of a Pokemon card’s height.
Pokemon Card vs Smartphone
Most smartphones run 2.8 to 3.1 inches wide, noticeably wider than a Pokemon card’s 2.5-inch width. That’s part of why the card feels compact and easy to fan out in one hand.
Japanese vs International Pokemon Card Dimensions
Here’s a fact that surprises a lot of collectors: Japanese Pokemon cards are the same size as international cards — both measure 63.5mm x 88.9mm.
The confusion comes from other Japanese card games like Yu-Gi-Oh! and Cardfight Vanguard, which really do run smaller at 59mm x 86mm. Don’t confuse those sleeve sizes with Pokemon’s.
Jumbo and Special Pokemon Card Sizes
Not every card follows the standard pokemon card size. Promotional and oversized cards break the mold entirely.
Jumbo Pokemon Card Dimensions (Pre-2020 vs Post-2020)
Pre-2020 Jumbo cards measured around 6 x 8 inches. In 2020, The Pokemon Company switched to a smaller Jumbo format at roughly 5.37 x 7.37 inches, redesigned to fit newer binder pages.
Box Topper Card Size
Box Topper cards run about 3.5 x 5 inches (90mm x 126mm). These come tucked into premium box sets and are strictly display pieces — not tournament legal.
CoroCoro XXL Card Size
CoroCoro XXL cards measure roughly 5.7 x 8.1 inches (145mm x 205mm). These are Japanese exclusives bundled with CoroCoro Comic magazine, and they’re among the hardest jumbo cards to find outside Japan.
Mini Pokemon Card Dimensions
Mini promotional cards occasionally appear at around 1.4 x 2 inches. They’re novelty items, not usable in official play.
What Size Sleeves Fit Pokemon Cards
Getting sleeve sizing right protects your collection from edge wear and moisture damage.
Standard Sleeve Dimensions
Standard outer sleeves measure about 66mm x 91mm (2.6 x 3.6 inches). That gap gives the card room to slide in without catching on the seam.
Perfect Fit Inner Sleeve Size
Perfect Fit sleeves run tighter, at roughly 64mm x 89mm. Collectors use these as an inner layer before adding a standard outer sleeve — a technique called double-sleeving.
Jumbo Sleeve Sizes
Jumbo card sleeves need to be much larger, often 4 x 6 inches or bigger, depending on whether you own a pre-2020 or post-2020 Jumbo card.
What Size Top Loader Fits a Pokemon Card
A standard 3 x 4-inch top loader rated 35pt is the go-to choice for single-sleeved standard cards. For double-sleeved cards, a 55pt top loader gives the extra room needed.
Top loaders aren’t measured by card thickness alone — they account for the sleeve too. That’s why a 35pt loader still fits a card that’s only 12-14pt thick on its own.
What Size Picture Frame Fits a Pokemon Card
For a single standard card, a frame with a 2.5 x 3.5-inch opening fits with no gaps. Many collectors size up slightly to 4 x 6 inches to leave a visible mat border around the card.
For Jumbo cards, you’ll need a custom frame sized to whichever Jumbo era you own — pre-2020 (6 x 8 in) or post-2020 (5.37 x 7.37 in). Standard off-the-shelf frames won’t fit these larger formats.
Pokemon Card Dimensions for Printing and Digital Design
Artists creating custom card art or proxies need pixel-accurate specs, not just inches.
Pixel Dimensions by DPI
At 300 DPI (standard print quality), a Pokemon card canvas is 750 x 1050 pixels. At 72 DPI for web use, it drops to 180 x 252 pixels.
Print Bleed and Safe Zone
Add a 0.125-inch bleed on all sides to prevent white edges after cutting, bringing the full canvas to 2.75 x 3.75 inches. Keep text and key artwork inside a 2.25 x 3.25-inch safe zone so nothing gets trimmed off.
Canvas Setup for Procreate/Photoshop
Set your canvas to 2.75 x 3.75 inches at 300 DPI, using a 5:7 aspect ratio. Going above 300 DPI on this canvas size can eat into your available layers in apps like Procreate.
FAQs About Pokemon Card Dimensions
What are the dimensions of a Pokémon card?
A standard Pokemon card measures 2.5 inches wide by 3.5 inches tall (63.5mm x 88.9mm). This applies to every official set worldwide.
Are Pokémon cards 3 inches?
No. Pokemon cards are 2.5 inches wide, not 3 inches. The height is 3.5 inches, so neither dimension lands exactly at 3 inches.
What size picture frame fits a Pokémon card?
A frame with a 2.5 x 3.5-inch opening fits a single card exactly. Many collectors choose a 4 x 6-inch frame instead, for a visible border around the card.
What size sleeves should I use for Pokémon cards?
Use standard sleeves sized 66mm x 91mm. For double-sleeving, pair a Perfect Fit inner sleeve (64mm x 89mm) with a standard outer sleeve.
What is the height and width of a card?
The height is 3.5 inches and the width is 2.5 inches. Height is always the longer edge when the card is held upright.
Is there a $1,000,000 Pokémon card?
Yes. The 1999 Shadowless Charizard and the Pikachu Illustrator card have both sold for over $1 million, with the Illustrator card reaching $5.275 million at auction.
Rehmaan Khan is a Measurement Content Researcher Specializing in PD measurements, Size Guides, Charts, and Simple Educational Measurement Content.